Power Phos

Ultra-Phos is a new aluminium based adsorber which safely removes phosphates and humic substances from the aquarium. The pollutants are bound to the surface of Ultra Phos and will not be released again.Ultra Power-Phos can maintain very low nutrient concentrations in your tank. Unwanted Algae growth will be stopped and corals will show their natural colours. Instructions and Dosing recommendationPlease do all changes in the aquarium carefully and slowly. Start with 50 gr per 200 L / 50 gal. of water. After 14 days the dose can be increased up to 100 gr per 200 L / 50 gal. of water, do NOT overdose!Check phosphate concentration regularly with reliable test kits, e.g. with the FaunaMarin PO4-Test. In case the PO4 level starts to increase again, exchange Ultra-Phos for fresh material. Do not use more than 100 g (3.5 oz) per 200 L (50 gal). We recommend to place the material in a filter chamber with high flow, only there it will provide its maximum performance.In case of extremely low PO4 levels and non-detectable Nitrate levels Ultra-Phos should not be used.Ultra-Phos is extremely strong and suitable for tanks with a high nutrient load. Ultra-Phos also removes unwanted organic compounds and yellowness. In tanks with high organic load (yellowish water) it may take a little while before the PO4 reduction becomes measurable. This is a normal process, you will notice the color change of the Ultra-Phos from white to yellow and the much clearer water in the aquarium.For a slower adsorption rinse the filled filter bag with osmotic water before use. To obtain best results and maximize adsorbtion efficiency, place the material between two layers of filter wool or use a fluidized-bed-reactor.In case you use the material in a fluidized bed reactor, please consider the much higher efficiency of the material. Reduce the amount of Ultra-Phos by 50 % and carefully control the flow through the filter.Ultra-Phos will become warm, when first immersed in water. Do not rinse the material. Keep away from children.Not to be used for animals used for food production.Do not inhale, do not swallow.Avoid contact with skin and eyes.

 CARB LHIGH-PURITY, STEAM-ACTIVATED, WASHED HIGH-ACTIVE FILTER CARBONCarb L is a long-term activated carbon designed for extended use in reef aquariums. It is a high-purity, steam-activated, washed high-active filter carbon made from the finest raw material for carbon: lignin.effectively removes yellow substances, turbidity, protein compounds, and harmful nematocystsensures crystal-clear watersupports the care and cleanliness of our aquarium systemsCarb L is extremely low in phosphate and highly effective in its binding capacityideal for long-term useshould be replaced after 3-4 weekssuitable for both freshwater and marine aquariumscleans the water without being too aggressive or significantly altering the pH levelContinuous filtration with Carb L (high-purity activated pellet carbon) is a cornerstone of the Zeo-Light system. Carb L is used as "long-term carbon" and is suitable for maintaining sensitive SPS and LPS corals. Filtration using activated carbon keeps the water crystal-clear—phenols, protein compounds, dyes, and nematocysts are filtered out and neutralized.Dosage:300 g of Carb L per 1000 liters of water using a fluidized bed methodMaximum flow rate: 200 liters/hour500 g of Carb L per 1000 liters of water when using a filter bag or nylon stockingReplacement Interval:Replace the carbon every 3–4 weeks, alternating with the bi-weekly zeolite change.Preparation Before Use:Pour hot water over Carb L one day before use and let it sit in water for 24 hours.More InformationFor further details and application instructions for our products, visit https://www.faunamarin.de/support-downloads/Also, check out our YouTube channel: Fauna Marin YouTube Channel

PHOS 0,04 a novel compound granules, which phosphates and yellow substances are safely removed from the aquarium cycle. A unique feature is the safe use of PHOS004, since the PO4-value can not fall to 0.00. Therefore Ultra PHOS 0,04 is safe, while extremely effective.Color and nutrients are tightly bound to the material and not re-released, so the nutrient content of the aquarium can be kept very low. Unwanted algae growth is effectively prevented and corals can develop their natural colors.Application and dosage:Please list changes in your aquarium slowly and carefully! Use 50 ml Ultra PHOS 0,04 per 100 liters of water.After 5 days, you can increase the amount of up to 100 ml per 100 liters of water. Check the PO4 content regularly. It is not advisable to UltraPHOS0,04 use at the lowest PO4 values.Best Ultra PHOS 0,04 is used,  behind a UV clarifier and after fine filtration in a fluidized bed reactor. The flow rate should be 100 - 200 liters / h. The slower the better. If the PO4 content rises again, replace Ultra PHOS 0,04 with fresh material. Keep Product away from children. Not for animals that use to serve as a source of food.Do not breathe, do not swallow.Skin and eye contact.

PROFESSIONAL, FAST, AND PRECISEFauna Marin REEF ICP TOTAL TestMost comprehensive laboratory analysis, over 90 parameters in seawater and reverse osmosis waterFast, affordable, and highly preciseProfessional sample collectionIndividual dosage and action recommendationsFor those who want to know exactlyTo verify your measurements at homeThe Fauna Marin REEF ICP TOTAL Test is our most comprehensive laboratory test for seawater, encompassing over 90 different measurement and relational values.You will receive a complete overview of macroelements, trace elements, nutrients, and pollutants with corresponding dosage and action recommendations.With every REEF ICP TOTAL Test, you can also have your reverse osmosis water tested for impurities at no cost.We analyze your sample using optical emission spectrometers with inductively coupled plasma (ICP-OES) as well as state-of-the-art photometric and electrochemical devices. These instruments ensure safe and precise analysis of elements and parameters.Values analyzed include (complete list see Technical Data):Salinity, pH, KH, Sodium, Magnesium, Sulfur, Sulfate, Calcium, Potassium, Bromine, Strontium, Boron, Fluoride,Nitrate, Nitrite, Total Phosphate, Ortho-Phosphate, Silica,Aluminum, Antimony, Arsenic, Barium, Beryllium, Lead, Cadmium, Chromium, Cobalt, Iron, Iodine, Copper, Lanthanum, Lithium,Manganese, Molybdenum, Nickel, Mercury, Selenium, Silver, Titanium, Vanadium, Tungsten, Zinc, Tin, Zirconium. Our Reef ICP Total analysis sets contain everything for professional sample collection.Filtering the sample ensures a safe and accurate analysis of nutrients and trace elements, free from interfering suspended matter.How does it work?Register on our laboratory website and create an aquarium to register your sampleOptional: Choose your ICP consultant from the listTake your water sample as described in the instructions and send it to us by mail (possibly with tracking)Once your sample has arrived at our laboratory, you will receive a confirmation emailThe normal processing time for samples in the laboratory is at least 1-2 working daysYou will receive your detailed analysis online on the laboratory website and a PDF summary via emailI have my analysis - what now?In your online account, you will receive comprehensive information, action, and dosage recommendations for your analysisCalculators for various systems will help you find and adjust the right dosageIn our knowledge database, you will find detailed information on each individual elementIf you still have questions, please contact your ICP consultant (if available and provided) orcontact our telephone support (fee-based)IMPORTANT:For shipping, we recommend a tracking option and providing a return address. Make a note of the sample number for any queries.Further shipping information and collection points for non-european countries can be found at https://lab.faunamarin.de/en