PRS - Purity Reef Salt 11kg
€89.90*
Available, delivery time: 3-5 days
Product information "PRS - Purity Reef Salt 11kg"
PURITY REEF SALT
HIGH-PURITY TWO-COMPONENT SEA SALT
Purity Reef Salt is a high-purity, two-component sea salt designed for professional and analytically managed marine aquariums. It has been specifically developed for applications where precise control of water chemistry and individual management of trace elements are required.
The salt deliberately contains no added trace elements. Only iodine and molybdenum are included in precisely balanced concentrations to ensure a stable biological base without influencing the targeted dosing of additional elements. The formulation is completely free of anti-caking agents, flow aids, and technical additives.
Purity Reef Salt is ideally suited for sensitive systems, for supportive use in cases of algae issues, cyanobacteria, or dinoflagellates, as well as for the preparation of analytically controlled aquarium systems. This product is intended exclusively for experienced users with in-depth knowledge of marine water chemistry.
Dosage:
Step 1:
- 124 g per 10 liters of RO/DI water
- Dissolve the measured amount of Purity Salt in a clean container with continuous water movement.
- Wait 5 minutes.
Step 2:
- Add a further 266 g.
- Dissolve the measured amount of Purity Salt with continuous water movement.
- Ready after 15 minutes.
Result:
Seawater with a salinity of approximately 33–35 PSU.
Dosage notes:
• Weigh both components separately
• Dissolve in tempered RO/DI water (23–26 °C) while stirring vigorously
• After approx. 15 minutes, the seawater is clear and ready for use
• Check salinity before use and adjust if necessary
Important note:
For experienced users only. An individual system analysis should be carried out before use. Due to the high purity of the mixture, the salt may form slight lumps. These are completely harmless and will fully dissolve with stirring.
Questions and answers about "Water Changes" can be found on our YouTube channel or in the "Videos" tab.
Available in Sizes:
- 11kg carton
Ingredients / Chemical Composition:
- Magnesium: 1.250 – 1.340 mg/l
- Calcium: 410 – 440 mg/l
- Postassium: 380 – 400 mg/l
- Sodium: 10.300 – 10.700 mg/l
- Chloride: 19.100 – 19.800 mg/l
- Sulphate: 3000 mg/l
- Alcalinity in dKH: 8,0 – 8,5°
- pH-Value: 8,0 – 8,4
- Strontium: 7,0–9,0 mg/l
- Iodine: 60 - 80 μg/l
- Fluoride: 1.9 mg/l
- Molybdenum: 15 μg/l
Safety Notice:
- Keep out of reach of children!
- Avoid eye contact! If the product gets into the eyes, rinse thoroughly with plenty of water.
- Wash hands after use.
- Do not inhale.
- Attention: Irritating.
- Do not swallow! If swallowed, seek medical attention - show the label to the doctor.
- For use only in seawater aquariums.
- Always read the label and product information before use.
Storage Information
- Store in a dry place, protected from light, at normal room temperature.
- Avoid contamination of the product with bacteria or dirt.
- Ensure that children do not have access to used or stored products.
Disposal
- The emptied bucket or carton can be disposed of with household waste or at recycling collection points.
- Please observe your local regulations for waste disposal.