MB 20 650g
€18.95*
Available, delivery time: 3-5 days
Ion exchanger Resin
Mixed Cation/Anion resin for Ion exchanger columns, e.g. Silicate Filter or Aqualight-Filter.
Always install the filter BEHIND a reverse osmosis system.
Check conductivity or hardness of the effluent water regularly, in case of increasing levels the resin has to be exchanged.
Regeneration of Ultra MB 20 is not economical.
Ultra MB 20 is a mixed Cation/Anion resin for the removal of all remaining ions after reverse osmosis. The water has the highest purity and is absolutely free of silicate.
Due to its unrivalled binding capacity Ultra MB 20 is a very economical way to achieve highest water quality.
By effectively removing all silicate, diatom growth will be stopped, Planarias and growth of unwanted slime algae and cyanos will be reduced.
Available in sizes:
- 1000ml
- 2000ml
- 5500ml
Safety note:
- Keep out of reach of CHILDREN!
- Avoid eye contact! If product gets into eyes, rinse with plenty of water.
- Wash hands after use.
- Do not inhale
- Warning Irritant
- Do not swallow! If the product has been swallowed, seek medical advice - Show the doctor the label.
- Intended for marine aquarium use only
- Always read label and product information before use
Storage note:
- Store in a dry place away from light at normal room temperature.
- Avoid contamination of the product with bacteria or dirt.
- Make sure that children do not have access to the used or stored products.
Disposal:
- The emptied can can be disposed of with household waste or at recycling points.
- Please observe your local waste disposal regulations.
Manufacturing information:
- MB 20 is produced in Germany in our house.
